ATA 100 contains the reference to the ATA numbering system which is a common referencing standard for commercial aircraft documentation. This commonality permits greater ease of learning and understanding for pilots, aircraft maintenance technicians, and engineers alike. The standard numbering system was published by the Air Transport Association on June 1, 1956. While the ATA 100 numbering system has been superseded, it continued to be widely used until it went out of date back in 2015, especially in documentation for general aviation aircraft, on aircraft Fault Messages (for Post Flight Troubleshooting and Repair) and the electronic and printed manuals.
The Joint Aircraft System/Component (JASC) Code Tables was a modified version of the Air Transport Association of America (ATA), Specification 100 code. It was developed by the FAA's, Regulatory Support Division (AFS-600). This code table was constructed by using the new JASC code four digit format, along with an abbreviated code title. The abbreviated titles have been modified in some cases to clarify the intended use of the accompanying code. The final version of the JASC/ATA 100 code was released by the FAA in 1999.
In 2000 the ATA Technical Information and Communications Committee (TICC) developed a new consolidated specification for the commercial aviation industry, ATA iSpec 2200. It includes an industry-wide approach for aircraft system numbering, as well as formatting and data content standards for documentation output. The main objectives of the new specification are to minimize cost and effort expended by operators and manufacturers, improve information quality and timeliness, and facilitate manufacturers' delivery of data that meet airline operational needs. More recently, the international aviation community developed the S1000D standard, an XML specification for preparing, managing, and using equipment maintenance and operations information.
The unique aspect of the chapter numbers is its relevance for all aircraft. Thus a chapter reference number for a Boeing 747 will be the same for other Boeing aircraft, a BAe 125 and Airbus Aircraft. Examples of this include Oxygen (Chapter 35), Electrical Power (Chapter 24) and Doors (Chapter 52).
Video ATA 100
ATA Chapters
Aircraft General
Airframe systems
Structure
Propeller/rotor
Power plant
Maps ATA 100
ATA extended list (Out Of Date)
ATA Specification 2200
The ATA extended List is a breakdown to para (second two numbers e.g. 5-00) and sub para (third two numbers e.g. 5-10-00) for each ATA chapter.
ATA Number and Para
01 *Reserved for Airline Use
02 *Reserved for Airline Use
03 *Reserved for Airline Use
04 *Reserved for Airline Use
05 TIME LIMITS/ MAINTENANCE CHECKS
- -00 General
- -10 Time Limits
- -20 Scheduled Maintenance Checks
- -30 & -40 Reserved
- -50 Unscheduled Maintenance checks
06 DIMENSIONS AND AREAS
07 LIFTING & SHORING
- -00 General
- -10 Jacking
- -20 Shoring
08 LEVELING & WEIGHING
- -00 General
- -10 Weighing and Balancing
- -20 Leveling
09 TOWING & TAXIING
- -00 General
- -10 Towing
- -20 Taxiing
10 PARKING, MOORING, STORAGE & RETURN TO SERVICE
11 PLACARDS AND MARKINGS
- -00 General
- -10 Exterior Color Schemes and Markings
- -20 Exterior Placards and Markings
- -30 Interior Placards
12 SERVICING.
- -00 General
- -10 Replenishing
- -20 Scheduled Servicing
- -30 Unscheduled Servicing
13 Unservicing
14 Reservicing
15 Ops Check Good
16 *Unassigned
17 *Unassigned
18 VIBRATION AND NOISE ANALYSIS (HELICOPTER ONLY)
- -00 GENERAL -
- -10 VIBRATION ANALYSIS
- -20 NOISE ANALYSIS
19 *Unassigned
20 STANDARD PRACTICES-AIRFRAME
- -00 Electrical Standard Items/Practices
- -90 *Reserved for Airline Use
21 AIR CONDITIONING
- -00 Air Conditioning - General
- -10 Compression
- -20 Distribution
- -30 Pressurization Control
- -40 Heating
- -50 Cooling
- -60 Temperature Control
- -70 Moisture/Air Contaminant Control
22 AUTO FLIGHT
- -00 General
- -10 Autopilot
- -20 Speed-Attitude Correction
- -30 Auto Throttle
- -40 System Monitor
- -50 Aerodynamic Load Alleviating
23 COMMUNICATIONS
- -00 General
- -10 Speech Communications
- -15 SATCOM
- -20 Data Transmission and Automatic Calling
- -30 Passenger Address, Entertainment and Comfort
- -40 Interphone
- -50 Audio Integrating
- -60 Static Discharging
- -70 Audio & Video Monitoring
- -80 Integrated Automatic Tuning
24 ELECTRICAL POWER
- -00 General
- -10 Generator Drive
- -20 AC Generation
- -30 DC Generation
- -40 External Power
- -50 AC Electrical Load Distribution
- -60 DC Electrical Load Distribution
25 EQUIPMENT/FURNISHINGS
- -00 General
- -10 Flight Compartment
- -20 Passenger Compartment
- -30 Galley
- -40 Lavatories
- -50 Additional Compartments
- -60 Emergency
- -70 Available
- -80 Insulation
26 FIRE PROTECTION
- -00 General
- -10 Detection
- -20 Extinguishing
- -30 Explosion Suppression
27 FLIGHT CONTROLS
- -00 General
- -10 Aileron & Tab
- -20 Rudder & Tab
- -30 Elevator & Tab
- -40 Horizontal Stabilizer
- -50 Flaps
- -60 Spoiler, Drag Devices and Variable Aerodynamic Fairings
- -70 Gust Lock & Dampener
- -80 Lift Augmenting
28 FUEL
- -00 General
- -10 Storage
- -20 Distribution
- -30 Dump
- -40 Indicating
29 HYDRAULIC POWER
- -00 General
- -10 Main
- -20 Auxiliary
- -30 Indicating
30 ICE AND RAIN PROTECTION
- -00 General
- -10 Airfoil
- -20 Air Intakes
- -30 Pitot and Static
- -40 Windows, Windshields and Doors
- -50 Antennas and Radomes
- -60 Propellers/Rotors
- -70 Water Lines
- -80 Detection
31 INDICATING/RECORDING SYSTEMS
- -00 General
- -10 Instrument & Control Panels
- -20 Independent Instruments
- -30 Recorders
- -40 Central Computers
- -50 Central Warning Systems
- -60 Central Display Systems
- -70 Automatic Data Reporting Systems
32 LANDING GEAR
- -00 General
- -10 Main Gear and Doors
- -20 Nose Gear and Doors
- -30 Extension and Retraction
- -40 Wheels and Brakes
- -50 Steering
- -60 Position Indication and Warning
- -70 Supplementary Gear
33 LIGHTS
- -00 General
- -10 Flight Compartment
- -20 Passenger Compartment
- -30 Cargo and Service Compartments
- -40 Exterior
- -50 Emergency Lighting
34 NAVIGATION
- -00 General
- -10 Flight Environment Data
- -20 Attitude & Direction
- -30 Landing and Taxiing Aids
- -40 Independent Position Determining
- -50 Dependent Position Determining
- -60 Flight Management Computing
35 OXYGEN
- -00 General
- -10 Crew
- -20 Passenger
- -30 Portable
36 PNEUMATIC
- -00 General
- -10 Distribution
- -20 Indicating
37 VACUUM
- -00 General
- -10 Distribution
- -20 Indicating
38 WATER/WASTE
- -00 General
- -10 Potable
- -20 Wash
- -30 Waste Disposal
- -40 Air Supply
39 *Unassigned
40 *Unassigned
41 WATER BALLAST
- -00 General
- -10 Storage
- -20 Dump
- -30 Indication
42 Integrated Modular Avionics (IMA)
43 *Unassigned
44 CABIN SYSTEMS
- -00 General
- -10 Cabin Core System
- -20 In-flight Entertainment System
- -30 External Communication System
- -40 Cabin Mass Memory System
- -50 Cabin Monitoring System
- -60 Miscellaneous Cabin System
45 CENTRAL MAINTENANCE SYSTEM (CMS)
- -00 General
- -5 thru -19 CMS/Aircraft General
- -20 thru -49 CMS/Airframe Systems
- -45 Central Maintenance System
- -50 thru -59 CMS/Structures
- -60 thru -69 CMS/Propellers
- -70 thru -89 CMS/Power Plant
46 INFORMATION SYSTEMS
- -00 General
- -10 Airplane General Information Systems
- -20 Flight Deck Information Systems
- -30 Maintenance Information Systems
- -40 Passenger Cabin Information Systems
- -50 Miscellaneous Information Systems
47 NITROGEN GENERATION SYSTEM
48 *Unassigned
49 AIRBORNE AUXILIARY POWER
- -00 General
- -10 Power Plant
- -20 Engine
- -30 Engine Fuel and Control
- -40 Ignition/Starting
- -50 Air
- -60 Engine Controls
- -70 Indicating
- -80 Exhaust
- -90 Oil
50 CARGO AND ACCESSORY COMPARTMENTS
- -00 General
- -10 Cargo Compartments
- -20 Cargo Loading Systems
- -30 Cargo Related Systems
- -40 Available
- -50 Accessory
- -60 Insulation
51 STANDARD PRACTICES, GENERAL
- -00 General
- -10 Investigation, Cleanup and Aerodynamic Smoothness
- -20 Processes
- -30 Materials
- -40 Fasteners
- -50 Support of Airplane for Repair and Alignment Check Procedures
- -60 Control-Surface Balancing
- -70 Repairs
- -80 Electrical Bonding
52 DOORS
- -00 General
- -10 Passenger/Crew
- -20 Emergency Exit
- -30 Cargo
- -40 Service and Miscellaneous
- -50 Fixed Interior
- -60 Entrance Stairs
- -70 Monitoring and Operation
- -80 Landing Gear
53 FUSELAGE
- -00 General
- -10 thru -90 (As Required) Fuselage Sections
54 NACELLES/PYLONS
- -00 General
- -10 thru -40 (As Required) Nacelle Section
- -50 thru -80 (As Required) Pylon
55 STABILIZERS
- -00 General
- -10 Horizontal Stabilizer or Canard
- -20 Elevator
- -30 Vertical Stabilizer
- -40 Rudder
56 WINDOWS
- -00 General
- -10 Flight Compartment
- -20 Passenger Compartment
- -30 Door
- -40 Inspection and Observation
57 WINGS
- -00 General
- -10 Center Wing
- -20 Outer Wing
- -30 Wing Tip
- -40 Leading Edge and Leading Edge Devices
- -50 Trailing Edge Trailing Edge Devices
- -60 Ailerons and Elevons
- -70 Spoilers
- -80 (as required)
- -90 Wing Folding System
58 *Unassigned
59 *Reserved for Airline Use
60 STANDARD PRACTICES - PROPELLER/ROTOR
61 PROPELLERS/PROPULSION
- -00 General
- -10 Propeller Assembly
- -20 Controlling
- -30 Braking
- -40 Indicating
- -50 Propulsor Duct
62 ROTOR(S)
- -00 General
- -10 Rotor blades
- -20 Rotor head(s)
- -30 Rotor Shaft(s)/Swashplate Assy(ies)
- -40 Indicating
63 ROTOR DRIVE(S)
- -00 General
- -10 Engine/Gearbox couplings
- -20 Gearbox(es)
- -30 Mounts, attachments
- -40 Indicating
64 TAIL ROTOR
- -00 General
- -10* Rotor blades
- -20* Rotor head
- -30 Available
- -40 Indicating
65 TAIL ROTOR DRIVE
- -00 General
- -10 Shafts
- -20 Gearboxes
- -30 Available
- -40 Indicating
66 FOLDING BLADES/PYLON
- -00 General
- -10 Rotor blades
- -20 Tail pylon
- -30 Controls and Indicating
67 ROTORS FLIGHT CONTROL
- -00 General
- -10 Rotor
- -20 Anti-torque Rotor control (Yaw control)
- -30 Servo-control System
68 *Unassigned
69 *Unassigned
70 STANDARD PRACTICES - ENGINES
71 POWER PLANT
- -00 General
- -10 Cowling
- -20 Mounts
- -30 Fireseals
- -40 Attach Fittings
- -50 Electrical Harness
- -60 Air Intakes
- -70 Engine Drains
72 ENGINE TURBINE/TURBO PROP DUCTED FAN/UNDUCTED FAN
- -00 General
- -10 Reduction Gear, Shaft Section (Turbo-Prop and/or Front Mounted Gear Driven Propulsor)
- -20 Air Inlet Section
- -30 Compressor Section
- -40 Combustion Section
- -50 Turbine Section
- -60 Accessory Drives
- -70 By-pass Section
- -80 Propulsor Section (Rear Mounted)
73 ENGINE FUEL AND CONTROL
- -00 General
- -10 Distribution
- -20 Controlling
- -30 Indicating
74 IGNITION
- -00 General
- -10 Electrical Power
- -20 Distribution
- -30 Switching
75 AIR
- -00 General
- -10 Engine Anti-Icing
- -20 Cooling
- -30 Compressor Control
- -40 Indicating
76 ENGINE CONTROLS
- -00 General
- -10 Power Control
- -20 Emergency Shutdown
77 ENGINE INDICATING
- -00 General
- -10 Power
- -20 Temperature
- -30 Analyzers
- -40 Integrated Engine Instrument Systems
78 EXHAUST
- -00 General
- -10 Collector/Nozzle
- -20 Noise Suppressor
- -30 Thrust Reverser
- -40 Supplementary Air
79 OIL
- -00 General
- -10 Storage
- -20 Distribution
- -30 Indicating
80 STARTING
- -00 General
- -10 Cranking
81 TURBINES
- -00 General
- -10 Power Recovery
- -20 Turbo-Supercharger
82 WATER INJECTION
- -00 General
- -10 Storage
- -20 Distribution
- -30 Dumping and Purging
- -40 Indicating
83 ACCESSORY GEAR-BOXES
- -00 General
- -10 Drive Shaft Section
- -20 Gearbox Section
84 PROPULSION AUGMENTATION
- -00 General
- -10 Jet Assist Takeoff
85 RECIPROCATING ENGINE
- -00 General
- -10 Fuel Cell Stack
86 *Unassigned
87 *Unassigned
88 *Unassigned
89 *Unassigned
90 *Unassigned
91 CHARTS
92 *Unassigned
93 *Unassigned
94 *Unassigned
95 *Reserved for Airline Use
96 *Reserved for Airline Use
97 WIRING REPORTING
98 *Reserved for Airline Use
99 *Unassigned
100 *Do not use
101 *Do not use
102 *Do not use
103 *Do not use
104 *Do not use
105 *Do not use
106 *Do not use
107 *Do not use
108 *Do not use
109 *Do not use
110 *Do not use
111 *Do not use
112 *Do not use
113 *Do not use
114 *Do not use
115 FLIGHT SIMULATOR SYSTEMS/WORK SIMULATION
Major Zones in Aircraft
- Zone 100 Fuselage Lower
- Zone 200 Fuselage Top
- Zone 300 Stabilizers / Empennage
- Zone 400 Nacelles-Pylons
- Zone 500 Left Wing
- Zone 600 Right Wing
- Zone 700 Landing Gear Compartment
- Zone 800 Doors
- Zone 900 Lavatories & Galleys
See also
- Air Transport Association
- S1000D
External links
- [1] For a list of the chapter headings
- S-TechEnterprises ATA Chapter list
- JASC Codes PDF
References
- ATA Specification 100 - Specification for Manufacturers' Technical Data, Revision No. 37 (1999). Air Transport Association of America.|}
Source of the article : Wikipedia
0 Comments